JAYPRAKASH ENGINEERS
CONTROL PANEL MANUFACTURERS
ELECTRICAL SERVICE PROVIDERS
AUTOMATION SERVICE PROVIDERS
ELECTRICAL CONTRACTORS
© jayprakash.in
JAYPRAKASH ENGINEERS What We Do
POWER CONTROL CENTER
Power Control Centre is used for distribution and control of various power source used in industry. Normally Power Control Centers is installed near power source hence fault level is high. It is designed to suit fault level of 50KA or 65 KA for 1 sec. Busbar system in Power Control Centers are designed to suit the fault level as well as temperature rise to 40°c above ambient. Ample space is provided for cable termination. Various protections viz short circuit, overload, earth fault, under voltage etc are provided to protect source and equipment.
| JPE | |||
| PROTECTION CLASS | IP42 / IP 54 / IP 55 - Optional | ||
| MOC | CRCA 10 / 12 / 14 / 16 Guage as required. Modular construction with wide choice of compartment size | ||
| RATED VOLTAGE | 600 V, 50 HZ, 3 phase, 4wire | ||
| RATED CURRENT | Up to 6000A main busbar | ||
| SHORT CIRCUIT LEVEL | STD 50 KA 1 sec Optional 65 KA 1 sec |
||
| BUSBAR SUPPORT | SMC / DMC | ||
| BUSBAR | Aluminium / Copper, Electrolytic grade | ||
| STANDARD | IS 8623.DT | ||
| BUS CHAMBER | With safety barrier | ||
| CABLE CHAMBER | Ample space for cabling with supports | ||
| ENTRY | Top or Bottom |
